We're using hypertufa to build a couple of cement walkways in our backyard. The walkways will eventually lead to our multi-tiered low-lying wooden deck.
We're also going to use hypertufa to create a small, hexagonal patio that joins the deck. It'll be where our small table and chairs will go. Jerry designed the deck and walkways, and I'm really, really excited about it. He has a lot of experience with deck design, and is really quite an artist when it comes to these sorts of things. He has a way of using space that is very compatible with my own aesthetic tendencies.
Hypertufa, since it is mixed with clay (at least in our case; there are lots of other things that you can mix into it), can look like rock, mud, bricks or polished stone when it is hardened. In our case, we used a trowel and a hoe to make it look like a rock walkway. I'm extremely happy with the results. I'll describe the process we used below.
There are lots of different recipes for hypertufa. We used the following:
2 parts clay
1 part Portland Cement
Carpenter's Wood Glue and Water at a ratio of 1 part per (roughly) 140 glue to water
The recipe that Jerry suggested called for wood glue at 1 part per 10 glue to water, but at that ratio, we would have used something like 10 gallons of glue, which would have been too expensive.
Without the wood glue, the hypertufa would eventually become nearly as hard as cement, but it could take a month or so to fully harden, and would stay shapable for at least a week. The wood glue makes it harden much, much faster; our patio was hard enough to walk on within 8 hours.
The wood glue also makes it harder, and seems to make it adhere to surfaces better. It's a pricey addition, but it's well worth it.
Enough talk; here are some pictures:

Portland Cement. A 92-lb bag is $10.66 at Home Depot. Our first walkway, which is 3' wide, between 2 and 3.5 inches deep, and about 27' long, used 5 bags of cement, and a hell of a lot of clay. Most of the clay came from the strip that we dug to make the pathway.

The first half of the walkway that we finished two weekends ago. The second half is still covered in plastic. It's important to keep the hypertufa moist while it is curing. If it dries out before it is finished curing, it will crack. Covering it in plastic takes advantage of condensation. You can see the entryway into our garden in the background.

A closer view of the pattern that we cut into the hypertufa. Because it is so new and hasn't really been walked on much yet, the lines still look too "clean"; they don't look rough like rocks. But once the walkway is used for a short time, this will change. This idea came (like nearly all of the ideas for this project) from Jerry Dodd, who used it to great effect on a patio in his own yard.

Detail of the scoring. About an hour or so after pouring the hypertufa into the forms, once it had started to harden, Kelley took a concrete trowel and cut lines (cut them all the way to the ground) into the screeded surface. These lines will make it look like rock, and will also provide a place for the hypertufa to expand and contract, and will prevent the walkway from cracking over time.
After about another 3-4 hours, when the hypertufa had hardened much more (but not so hard that it was too hard to score), I took a hoe and used the point of it to "bevel" the lines. This created more of a divider between the different "rocks", and gave it a more natural look.
Our walkway will be nearly as hard as cement, but because of fluctuations in the mixed material (i.e. places where there is more clay than cement), it will wear unevenly, especially in the first few months. This will roughen up the lines between the "rocks", and will make it look even more authentic.

Detail of the edge. When we have time, we will fill in the edges with soil and plant grass, so this edge is mostly gone, and the hypertufa will be at soil level. This will also prevent the edges from becoming a channel for water, since the pathway runs downhill.

This is the beginning of next weekend's walkway. We used furring strips and wood stakes to frame the walkway. I'm going to use a shovel to cut the sod out of the frame, then dig down half an inch or so. This will make the walkway about 2 inches deep, and will (hopefully) provide most of the clay that we'll need for the hypertufa mixture.
The two cement circles are for another job. They'll support some of the joists when we build the patio.

The dimensions of my form are off; I'm going to fix this before I pour. But as you can see, the walkway will lead to our workshop and to the mulched walkway down the side of our new house addition.

Detail of how to stake the forms. You can see the fist stage of the patio in the background; the steps that will eventually lead to level 1.
I'm very excited about this project, and about hypertufa in general, as you can see. I am also very grateful to Jerry Dodd for spending so much time designing and laboring, and for being so uniquely creative!
Stay tuned for updates!



